NERC Critical Infrastructure Protection (CIP) Practice Exam

These questions are part of the practice quiz. Start practicing

• Which of the following is true about physical I/O ports?
• How is "implementation" of supply chain cybersecurity plans demonstrated?
• What does a unidirectional gateway combine to ensure information transfer in one direction?
• What is a potential disadvantage of using dial-up connectivity?
• What is the primary focus of CIP-014?
• What was a significant requirement introduced by FERC Order 822?
• Which of the following areas is NOT a required topic in Cyber Security policies?
• Which FERC Order approved the CIP Version 3 set of Standards?
• What is a disadvantage of stateless packet filtering firewalls?
• Which of the following must be included in a documented plan for securing Real-Time Communication?
• What should be enabled on USB devices to enhance security?
• Which office of FERC is focused on electric reliability?
• What advantage does an IPS provide compared to an IDS?
• Which order focuses on mitigating risk associated with malicious code on third-party Transient Cyber Assets?
• What does the term "transient cyber assets" refer to in the context of CIP?
• What is a primary characteristic of ICS-specific firewalls?
• What is the purpose of a 'heartbeat' in firewall configurations?
• What does the term "ephemeral port" refer to?
• Which of the following actions is recommended after implementing changes to baseline configurations?
• Which is a goal of the BES Cyber Asset identification process?
• What is a condition under which the physical security plan of a transmission facility may require third-party review?
• How often should the CIP Senior Manager review and approve plans?
• What should the physical security plan include according to CIP-006 R1?
• What should be done with the evidence collected for physical I/O ports?
• What was the main reason for the establishment of NERC?
• What is the primary goal of applying requirements to specific Cyber Assets?
• Which type of filtering requires knowledge of both inbound and outbound network traffic?
• What aspect of the electric transmission system does the Energy Policy Act of 2005 focus on?
• What does vulnerability management focus on?
• The Texas Reliability Entity (TRE) is one of how many regional entities?
• What is the primary function of assets in the security patching architecture?
• How frequently should security event logs be reviewed to identify undetected cyber security incidents?
• How does a Network IDS (NIDS) primarily monitor communications?
• In Linux, what should be done with unnecessary operational packages?
• Which of the following is a characteristic of an active vulnerability assessment?
• Which types of external communications are exempt according to CIP-002 5.1?
• What is the initial notification timeframe for Reportable Cyber Security Incidents?
• What is one of the goals of conducting vulnerability assessments?
• What entities are sources for obtaining patches?
• What is the required frequency for conducting vulnerability assessments as outlined in CIP-010 R3?
• Where should directory servers used for authentication be located according to security guidelines?
• What does the acronym FERC stand for?
• What type of audits are commonly referred to as 706 audits?
• What does CIP-007 R4 require regarding event logging?
• What is one key consideration when applying patches?
• What evidence should be documented to support the physical and logical port management process?
• Which entities must be notified of Reportable Cyber Security Incidents?
• What is one critical component of a mitigation plan for deferred security patches?
• Which document is essential for timely evaluation and implementation of security patches?
• What is a key benefit of utilizing a staged rollout strategy for signature updates?
• How does security event management relate to Cyber Assets?
• The NERC Reliability Functional Model is designed to ensure the reliability of what type of system?
• What did FERC Letter Order approve regarding Reliability Standard CIP-003-8?
• What must be retained for 90 days as per physical access requirements?
• What does a stateful inspection firewall do that a stateless packet filtering firewall does not?
• What is an appropriate local internal action in response to detected malicious code?
• Which order is associated with the approval of CIP audits, often referred to as 706 audits?
• What is a required action to prevent malicious code according to CIP-007 R3?
• How do CIP-010 and CIP-007 interconnect regarding patch management?
• When was NERC formed as a non-profit organization?
• What is a key requirement of System Access Control under CIP-007 R5?
• What distinguishes a scan of interest from a sequential port scan?
• What standard previously focused on sabotage reporting requirements before being retired?
• What type of logging is required for visitors according to the visitor control program?
• What must be done before performing a full active pen test at transmission substations?
• How does FERC Order 822 relate to inter-control center communications?
• What is a requirement for Interactive Remote Access sessions according to CIP-005 R2?
• What do BES Reliability Operating Services (BROS) contribute to?
• What are the primary components of the Four Legged Firewall?
• How frequently should security patches be evaluated?
• What is required of an unaffiliated third party in relation to risk assessments?
• How many Regional Entities are there under NERC?
• What is a major characteristic of the patching timeline?
• What is the main advantage of using proxies as firewalls?
• What is a primary risk associated with the use of an IPS?
• According to NERC CIP, which assets must comply if they operate certain types of load shedding equipment?
• What can be considered a successful security patch management practice?
• What is required for signature updates in compliance with CIP-005?
• How does the Bottom Up approach function in BES Cyber Asset identification?
• Who is responsible for approving the list of identified BES Cyber Assets?
• Why is it important to perform regular reviews of dial-up logging capabilities?
• What was a driving factor behind the increase in ICS-focused cyber attacks?
• What is a significant issue related to application whitelisting after periodic updates?
• What should be included in a security patch management process?
• What does Functional Registration require from entities?
• What is a significant disadvantage of using VLANs?
• When applying security to a BES Cyber Asset, which approach should be prioritized?
• According to CIP-006 R2, what is required for visitor access in physical security?
• What is one of the main actions following the detection of malicious code in a system?
• How often should configuration monitoring take place for high impact BES systems according to CIP-010?
• What capability does application deep packet inspection firewalls include?
• What type of access control list is typically associated with routers?
• Which entity primarily works through audits, self-reports, and enforcement?
• Who is responsible for classifying a Reportable Cyber Security Incident?
• What is necessary for USB device safety according to the outlined protections?
• In the standards development process, what is the first step listed in the Standards Authorization Request form (SAR)?
• Which type of firewall operates based solely on source and destination information?
• How are logical ports categorized according to their usage by the IANA?
• What should happen within 30 calendar days for deviations from the baseline configuration?
• What is the range of Well-Known ports as defined by IANA?
• How often must CIP senior managers approve Cyber Security policies?
• What is mandated by CIP-004 R1 regarding security awareness?
• What should the review of BES Cyber Asset identification include in terms of categorization?
• What distinguishes standard ACLs from extended ACLs in networking?
• What should be done with the outputs from running configuration reviews?
• What is a requirement for having electronic routable communications in a network?
• What is the primary goal of Security Information Event Management (SIEM) in relation to utility reliability?
• What is a key consideration in the BES Cyber Asset identification process?
• What should be monitored within 15 minutes according to the monitoring requirements?
• When updating the recovery plan, which document should be reviewed?
• What does the recovery plan ensure regarding data preservation?
• Which section must be included in the documented plans for Transient Cyber Assets?
• What facilities are categorized under CIP-002 BES Cyber System Categorization?
• How should unauthorized changes to the baseline configuration be handled?
• What is a key focus of FERC Order 843?
• Why is timely patching critical for stateful inspection firewalls?
• FERC Order 791 is primarily concerned with the changes resulting in which version of the CIP Standards?
• Which of the following describes a proxy server's filtering capability?
• How often should the identification of BES Cyber Assets be reviewed or updated?
• What should occur every 36 months when it pertains to active vulnerability assessments?
• Which assets are exempt from NERC CIP regulations as per the applicability exemptions?
• What is the purpose of identifying UFLS and UVLS systems as part of the Distribution Provider Applicable facilities?
• What distinguishes assets from systems in terms of security management?
• Which of the following best describes VLANs?
• What is the default recovery period after the start of a reportable disturbance in BES Cyber Assets?
• Which of the following topics should be covered in a Cyber Security training program?
• How often must recovery plans be tested?
• What is one method to control physical ports effectively?
• What clarification did FERC Order 706-B provide?
• What should be included in Periodic Reviews of BES Cyber Assets?
• What should an organization do when a critical asset goes End of Life (EOL)?
• What is a unique feature of data diodes in perimeter defense?
• What is part of the documentation needed for the procurement plan?
• What is one of the steps in Configuration Change Management under CIP-010 R1?
• In which layer of the OSI model do stateless packet filtering firewalls operate?
• What does FERC Order 693 primarily approve?
• Which firewall type uses deep packet inspection to analyze content?
• Which attack is associated with VLAN exploits?
• What is the primary purpose of the Buddy System Model for grouping assets?
• What must be done to known default passwords according to CIP-007 R5?
• Which describes a benefit of application whitelisting?
• Which professional designation is specifically focused on physical security?
• What is the recommended action regarding unneeded protocols in Windows configurations?
• What is vital to consider in your patch management universe according to CIP-010?
• What is the first step in the security patching process according to NERC CIP standards?
• What is the purpose of the NERC Reliability Functional Model?
• What command is used by auditors to identify open ports?
• What should be updated within 60 calendar days after a change in roles or responsibilities?
• What aspect of ICS-specific firewalls allows for tailored security measures?
• What is a common disadvantage of Intrusion Detection Systems (IDS)?
• Which of the following is an advantage of stateful inspection firewalls?
• Which firewall type is primarily used to filter web traffic?
• Which process is critical for managing post-approval changes to the authorization scope?
• In a firewall redundancy strategy, what defines a hot backup?
• Which tool does the audit team utilize to select random samples from data populations?
• What is a primary advantage of dial-up access control?
• How frequently must Cyber Security Incident response plans be tested?
• What is a key requirement for device-level protection of logical ports?
• What characteristic defines the vulnerability of stateless packet filtering firewalls?
• What is a potential limitation of using a proxy firewall?
• Which type of facilities does CIP-014 apply to?
• Which architecture aspect is crucial for Security Information Event Management (SIEM)?
• How are BES Cyber Assets logically grouped into BES Cyber Systems?
• What role do antivirus servers play in security architecture?
• What is a logical protection method for securing cables and nonprogrammable communication?
• What must be documented within 90 days after testing a Cyber Security Incident response plan?
• What type of firewalls serves as a redundancy strategy in network security?
• What is the significance of the 1500 MW generation threshold in BES Cyber Systems?
• Which of the following is not one of the NERC Regional Entities?
• Which organization is associated with the Purdue Model of network architecture?
• Which statement best describes the nature of a vulnerability assessment?
• Which event is used to demonstrate compliance configuration-related actions?
• What is a feature of an intrusion detection system in relation to host activity?
• Cyber threats to ICS environments include which of the following types of activities?
• What type of maintenance is required for Physical Access Control Systems according to CIP-006 R3?
• What system architecture can be utilized to limit dial-up connections?
• Which of the following describes a technical control for physical ports?
• What makes an Intrusion Prevention System (IPS) different from an IDS?
• What should be documented after conducting a vulnerability assessment?
• What is one of the conditions for activating the recovery plan?
• How often should logged events be reviewed, according to security event monitoring standards?
• What is the role of an Intrusion Detection System (IDS)?
• Which of the following is required for the physical access control system according to CIP-006 R3?
• What is required before adding a new applicable Cyber Asset to a production environment?
• What is a potential risk when using stateless packet filtering firewalls?
• Which group is specifically mentioned as needing access through Interactive Remote Access?
• What must any future procurement contracts address regarding vendors?
• What is an example of a facility type included in the bulk-power system under the Energy Policy Act of 2005?
• What is crucial to document and notify according to cyber security risk management plans?
• What is the recommended practice to mitigate threats on removable media?
• What is an advantage of using VLANs in a network?